FEEL SAFE, AGAIN!

Nowadays, with the advent of IT technologies, we are living in the era of the Technological Revolution. With the most technologically demanding population, it is essential to create solutions that can exceed user expectations. SIT Security No Panic is a complete communication solution, which allows users to communicate immediately, in emergency situations or imminent danger.

SIT SECURITY

NOPANIC

The mobile application SIT Security No Panic instantly communicates emergencies and other events, for an immediate and simplified response from the entire internal security team, as well as all responsible personnel at the defined location.

MORE THAN JUST A

PANICBUTTON

After activating the emergency button, a predefined notification is sent to all defined personnel and / or security personnel on site. In addition to the notification, the team will have access to additional details about the location of the incident, type of incident, victim of the incident and more. This helps the security team to determine the next steps, even before arriving at the site, as the best access point for the emergency.

CHARACTERISTICS

NOPANIC

• Rapid response by security elements.
• Bilateral communication between mobile users and security and control posts.
• Possibility of creating contingency plans for public emergency situations.
• Broadcasting of information of general interest by system administrators.
• Record the viewing time, displacement and duration of the Action for each alert.
• Identification of the user who issues a photo alert.
• Identification of the security element (private security, police, head of the unit) that displays the alert and intervenes.
• Identification of the area where the alert is issued.
• Alerts received in a personalized way at the assigned level.
• Use of geographic coordinates in case of an alert made abroad.
• Time record of each Share.
• Possibility to register occurrences that go outside the scope of security, example: broken window, damaged equipment … etc!
• Movement history
• Contact list of emergency agencies for each location.
• Hold responsible bodies and entities accountable.

NOTIFICATIONS

EFFICIENT MESSAGES

Plan and automate internal communications to maximize the efficiency of incident management and emergency response plans. Customize messages to send to pre-selected groups and / or individuals during a situational crisis.

STREAMLINE URGENT INTERNAL COMMUNICATIONS

The SIT No Panic team assistance feature allows authorized employees to communicate with groups or individuals without having to initiate a call. Internal groups and message templates are predetermined to allow quick communication and reduce response to problems.

HOME . WINDOWS APP

The “home” is our “monitoring center”, We have all the information about possible occurrences that are happening. We are able to quickly understand the location of the occurrence, the most problematic areas, as well as a history of the occurrences. We also have information about the person who activated the alert, the type and level of the alert and by whom it was viewed / resolved.

O conteúdo noPanic aparece primeiro em Hoplon.

Power supply 10…15V DC by two independent circuits
One with permanent supply for critical devices (ex.: medical)
Circuit supplies 20 outputs:
– Outputs grouped into 4
– Each group can be activated permanently or after placing the key in the ignition.
– Outputs with 25A RMS / 50A peak

All outputs are protected by fuses and transient voltages (TVs).
One for the controlled power outputs
Circuit supplies 28:
2 combined outputs for motor direction control and capable of delivering up to 15A Rms / 30A peak with a fuse and transient voltage suppressor (TVs)

All 2 outputs have:
– 22 SSR outputs for general use with:
– Ability to obtain up to 25A Rms / 50A peak.
– Current limiting protection by fuse and SSR limit
– Transient voltage suppressor

4 outputs for PWM control protected by TVs and PTC fuse limited to 8A.

4 outputs for signal or power deviation up to 15A Rms / 30A peak
6 Interfaces for HMI devices:
2 USB 2.0
4 RS232 for auxiliary keyboards

16 digital inputs:
8 active low (GND)
4 active high (+ 12v)

4 analog inputs for level measurement (eg battery level, current consumption)
4 interfaces for temperature sensors

O conteúdo C700 aparece primeiro em Hoplon.

Power supply 10…15V DC by two independent circuits
One with permanent supply for critical devices (ex.: medical)
Circuit supplies 23 outputs:
14 outputs with 15A RMS/30A peak
2 outputs with 25A RMS/50A peak
6 outputs with 15A RMS/30A peak active only after ignition key

All outputs are protected by fuse
One for the controlled power outputs
Circuit supplies 28:
4 outputs combined by 2 with reverse polarity capacity normally used for motor direction control
All 4 outputs with capacity to source up to 15A Rms/30A peak with a fuse and transient voltage suppressor (TVs)
16 outputs for general purpose with:
Capacity to source up to 15A Rms/30A peak.
Current limiting protection by fuse
Transient voltage suppressor

4 solid state relay outputs for PWM control protected by TVs and PTC fuse limited to 8A.

4 outputs for signal bypass or power up to 15A Rms/30A peak
4 Interfaces for HMI devices:
2 USB 2.0
2 RS232 for auxiliary keypads

16 digital inputs:
8 active low (GND)
4 active high (+12v)
4 with polarity selectable

4 analogue inputs for level measuring (ex.: battery level, current consuming)
4 interfaces for temperature sensors

O conteúdo C500 aparece primeiro em Hoplon.

25x outputs 30A Max relay SPST fuse protection

3x relay SPDT

1x output transitor – fuse

9x outputs – fuse

3x inputs LOW

4x inputs HIGH

1x port I2C

2x port UART

1x GPIO

O conteúdo L300 aparece primeiro em Hoplon.

20x outputs 30A Max relay SPST fuse protection

3x relay SPDT

1x output transitor – fuse

4x outputs – fuse

3x inputs LOW

4x inputs HIGH

1x port I2C

2x port UART

1x GPIO

O conteúdo M200 aparece primeiro em Hoplon.

TECHNICAL SPECIFICATIONS

10x outputs 30A Max relay SPST fuse protection

3x relay SPDT

1x output transitor – fuse

3x inputs LOW

4x inputs HIGH

1x port I2C

2x port UART

1x GPIO

O conteúdo DIN10 aparece primeiro em Hoplon.