Arquivo de SIT. AMBULANCE - Hoplon https://hoplon.pt Desenvolvimento de Equipamentos Eletrónicos e Software Thu, 12 Nov 2020 16:02:17 +0000 pt-PT hourly 1 https://wordpress.org/?v=5.8.1 https://hoplon.pt/wp-content/uploads/2020/01/cropped-hoplon-favicon-512px-1-85x85.jpg Arquivo de SIT. AMBULANCE - Hoplon https://hoplon.pt 32 32 SIT.AMB https://hoplon.pt/portfolio/sitamb/ Fri, 24 Apr 2020 22:44:24 +0000 https://hoplon.pt/?post_type=portfolio&p=3156 O conteúdo SIT.AMB aparece primeiro em Hoplon.

]]>

SIT AMBULANCE

ELECTRONIC
CONTROL
UNIT

SIT Ambulance is the most advanced intelligent electronic system, that operates and monitors the vehicles electronics and lighting system.
It is working with the newest automotive technologies and solid-state electronics.

DISPLAY

SIT Amb features a:

7 ”display with 800×480 resolution

70/70/50/70 view angle

RS-232 Input Signal.

O conteúdo SIT.AMB aparece primeiro em Hoplon.

]]>
C700 https://hoplon.pt/portfolio/c700/ Sun, 15 Mar 2020 22:04:18 +0000 https://hoplon.pt/?post_type=portfolio&p=3150 TECHNICAL SPECIFICATIONS Power supply 10…15V DC by two independent circuitsOne with permanent supply for critical devices (ex.: medical)Circuit supplies 20 outputs:– Outputs grouped into 4– Each group can be activated permanently or after placing the key in the ignition.– Outputs with 25A RMS / 50A peak All outputs are protected by fuses and transient voltages […]

O conteúdo C700 aparece primeiro em Hoplon.

]]>
TECHNICAL SPECIFICATIONS

Power supply 10…15V DC by two independent circuits
One with permanent supply for critical devices (ex.: medical)
Circuit supplies 20 outputs:
– Outputs grouped into 4
– Each group can be activated permanently or after placing the key in the ignition.
– Outputs with 25A RMS / 50A peak

All outputs are protected by fuses and transient voltages (TVs).
One for the controlled power outputs
Circuit supplies 28:
2 combined outputs for motor direction control and capable of delivering up to 15A Rms / 30A peak with a fuse and transient voltage suppressor (TVs)

All 2 outputs have:
– 22 SSR outputs for general use with:
– Ability to obtain up to 25A Rms / 50A peak.
– Current limiting protection by fuse and SSR limit
– Transient voltage suppressor

4 outputs for PWM control protected by TVs and PTC fuse limited to 8A.

4 outputs for signal or power deviation up to 15A Rms / 30A peak
6 Interfaces for HMI devices:
2 USB 2.0
4 RS232 for auxiliary keyboards

16 digital inputs:
8 active low (GND)
4 active high (+ 12v)

4 analog inputs for level measurement (eg battery level, current consumption)
4 interfaces for temperature sensors

O conteúdo C700 aparece primeiro em Hoplon.

]]>
C500 https://hoplon.pt/portfolio/c500/ Tue, 10 Mar 2020 09:17:07 +0000 http://sw-themes.com/porto_dummy/?post_type=portfolio&p=116 TECHNICAL SPECIFICATIONS Power supply 10…15V DC by two independent circuitsOne with permanent supply for critical devices (ex.: medical)Circuit supplies 23 outputs:14 outputs with 15A RMS/30A peak2 outputs with 25A RMS/50A peak6 outputs with 15A RMS/30A peak active only after ignition key All outputs are protected by fuseOne for the controlled power outputsCircuit supplies 28:4 outputs […]

O conteúdo C500 aparece primeiro em Hoplon.

]]>
TECHNICAL SPECIFICATIONS

Power supply 10…15V DC by two independent circuits
One with permanent supply for critical devices (ex.: medical)
Circuit supplies 23 outputs:
14 outputs with 15A RMS/30A peak
2 outputs with 25A RMS/50A peak
6 outputs with 15A RMS/30A peak active only after ignition key

All outputs are protected by fuse
One for the controlled power outputs
Circuit supplies 28:
4 outputs combined by 2 with reverse polarity capacity normally used for motor direction control
All 4 outputs with capacity to source up to 15A Rms/30A peak with a fuse and transient voltage suppressor (TVs)
16 outputs for general purpose with:
Capacity to source up to 15A Rms/30A peak.
Current limiting protection by fuse
Transient voltage suppressor

4 solid state relay outputs for PWM control protected by TVs and PTC fuse limited to 8A.

4 outputs for signal bypass or power up to 15A Rms/30A peak
4 Interfaces for HMI devices:
2 USB 2.0
2 RS232 for auxiliary keypads

16 digital inputs:
8 active low (GND)
4 active high (+12v)
4 with polarity selectable

4 analogue inputs for level measuring (ex.: battery level, current consuming)
4 interfaces for temperature sensors

O conteúdo C500 aparece primeiro em Hoplon.

]]>
L300 https://hoplon.pt/portfolio/l300/ Mon, 09 Mar 2020 09:57:28 +0000 http://sw-themes.com/porto_dummy/?post_type=portfolio&p=129 TECHNICAL SPECIFICATIONS 25x outputs 30A Max relay SPST fuse protection 3x relay SPDT 1x output transitor – fuse 9x outputs – fuse 3x inputs LOW 4x inputs HIGH 1x port I2C 2x port UART 1x GPIO

O conteúdo L300 aparece primeiro em Hoplon.

]]>
TECHNICAL SPECIFICATIONS

25x outputs 30A Max relay SPST fuse protection

3x relay SPDT

1x output transitor – fuse

9x outputs – fuse

3x inputs LOW

4x inputs HIGH

1x port I2C

2x port UART

1x GPIO

O conteúdo L300 aparece primeiro em Hoplon.

]]>
M200 https://hoplon.pt/portfolio/m200/ Sun, 08 Mar 2020 10:00:46 +0000 http://sw-themes.com/porto_dummy/?post_type=portfolio&p=120 TECHNICAL SPECIFICATIONS 20x outputs 30A Max relay SPST fuse protection 3x relay SPDT 1x output transitor – fuse 4x outputs – fuse 3x inputs LOW 4x inputs HIGH 1x port I2C 2x port UART 1x GPIO

O conteúdo M200 aparece primeiro em Hoplon.

]]>
TECHNICAL SPECIFICATIONS

20x outputs 30A Max relay SPST fuse protection

3x relay SPDT

1x output transitor – fuse

4x outputs – fuse

3x inputs LOW

4x inputs HIGH

1x port I2C

2x port UART

1x GPIO

O conteúdo M200 aparece primeiro em Hoplon.

]]>
S100 https://hoplon.pt/portfolio/s100/ Sat, 07 Mar 2020 10:04:21 +0000 http://sw-themes.com/porto_dummy/?post_type=portfolio&p=126 TECHNICAL SPECIFICATIONS 15x outputs 30A Max relay SPST fuse protection 3x relay SPDT 1x output transitor – fuse 3x inputs LOW 4x inputs HIGH 1x port I2C 2x port UART 1x GPIO

O conteúdo S100 aparece primeiro em Hoplon.

]]>
TECHNICAL SPECIFICATIONS

15x outputs 30A Max relay SPST fuse protection

3x relay SPDT

1x output transitor – fuse

3x inputs LOW

4x inputs HIGH

1x port I2C

2x port UART

1x GPIO

O conteúdo S100 aparece primeiro em Hoplon.

]]>
DIN10 https://hoplon.pt/portfolio/din10/ Fri, 06 Mar 2020 10:06:56 +0000 http://sw-themes.com/porto_dummy/?post_type=portfolio&p=124 TECHNICAL SPECIFICATIONS 10x outputs 30A Max relay SPST fuse protection 3x relay SPDT 1x output transitor – fuse 3x inputs LOW 4x inputs HIGH 1x port I2C 2x port UART 1x GPIO

O conteúdo DIN10 aparece primeiro em Hoplon.

]]>

TECHNICAL SPECIFICATIONS

10x outputs 30A Max relay SPST fuse protection

3x relay SPDT

1x output transitor – fuse

3x inputs LOW

4x inputs HIGH

1x port I2C

2x port UART

1x GPIO

O conteúdo DIN10 aparece primeiro em Hoplon.

]]>
Reanibex 300AED https://hoplon.pt/portfolio/reanibex300aed/ Mon, 02 Mar 2020 21:21:38 +0000 https://hoplon.pt/?post_type=portfolio&p=3003 O conteúdo Reanibex 300AED aparece primeiro em Hoplon.

]]>

features

  • Biphasic technology.
  • Universal AED algorithm for adult and paediatric patients.
  • Large colour display 5.7″.
  • Possibility of setting the screen on high contrast mode.
  • “Push Pad” device, reports the quality of the frequency and depth of chest compressions in real time (optional).
  • Autotraining mode (optional).
  • Trainer option with remote control (optional).
  • Configurable CPR protocol.
  • Configured according to ERC/AHA guidelines 2015 and its review of 2017.
  • Automatic daily selftest ensures the device continual readiness.
  • USB connection.
  • Rugged and durable design for any environment.

acessories

  • Adult and paediatric disposable electrodes for defibrillation
  • Carrying case (1)
  • Ambulance bracket (EN1789:2007 certified) (2)
  • “Push Pad” device
  • Rechargeable and non rechargeable battery (3)
  • External battery charger
  • External dual battery charger 12V (DC) or 220V (AC)
  • “REANIBEX Data Manager” Software application to manage and organize all the data gathered (3)
  • Rechargeable battery for autotraining and trainer mode (4)

TECHNICAL SPECIFICATIONS

GENERAL

  • Dimensions . 290mm(W) x 245mm(D) x 100mm(H)
  • Weight . 2.75Kg (with the battery)

DEFIBRILLATOR

  • Waveform . Biphasic truncated exponential adjusted to the impedance of the patient
  • Output energy . From 150 to 360 Joules for adult patients and from 40 to 90 Joules for pediatric patients
  • Charging time . Less than 5 seconds at 200 Joules with a new fully charged battery at 25ºC
  • Charging time . Less than 7 seconds at 360 Joules with a new fully charged battery at 25ºC
  • Indicators . Text Messages, audible alerts, status indications, battery indicator, metronome, CPR help with feedback
  • Available energy indicators . Charging tone, available energy tone, flashing discharge button, audible messages

AED MODE

  • Defibrillable rhythms . Ventricular fibrillations and rapid ventricular tachycardias
  • CPR Help . Metronome with compressions rate feedback in real time. With the push-pad device option: compressions rate and depth feedback in real time
  • Specificity and sensitivity of the detection algorithm . Fulfills AHA requirements
  • Resuscitation guidelines . Factory set Guidelines 2015 (ERC/AHA) and its review of 2017

SCREEN

  • Size . 5,7″ (diagonal)
  • Type . TFT Colour
  • Resolution . 480 x 640 pixels
  • Sweep rate . 25 mm/s for the ECG
  • Display time . 4 seconds of ECG signal

DATA STORAGE

  • Internal memory . Stores the continuous ECG signal with all the events and the sound (only in AED mode). Up to 4GB, which is approximately 10 hours of continuous ECG signal with all the events and audio recording for each episode.
  • USB connection . For USB memory stick
  • Data review . PC application (Reanibex Data Manager) for downloading, reproducing, handling, storing and reviewing recorded episodes (optional)

BATTERY

  • Type . Li-Ion rechargeable battery and Li-SO2 non-rechargeable battery
  • Battery indicators . Battery status indicator on screen, low battery indication and absence of battery indication on the status indicator
  • Capacity . Rechargeable battery: More than 200 discharges at 360 Joules with a new fully charged battery at 25ªC. Non-rechargeable battery: More than 270 discharges at 360 Joules at 25ºC.

ENVIRONMENT

  • Operating temperature . From 0 to 50ºC
  • Storage temperature . From -20 to 60ºC
  • Humidity . From 10 to 95% (non-condensing)
  • Altitude . 0 to 5000 m
  • Shocks and vibrations . EN 1789:2007 – MIL STD 810 G, category 16
  • Resistance to solids/liquids . IP55
  • EMC . Complies with IEC 60601-1-2:2007

READY FOR LIFE

O conteúdo Reanibex 300AED aparece primeiro em Hoplon.

]]>
Reanibex 200 https://hoplon.pt/portfolio/reabinex200/ Sun, 01 Mar 2020 15:11:31 +0000 https://hoplon.pt/?post_type=portfolio&p=2923 O conteúdo Reanibex 200 aparece primeiro em Hoplon.

]]>

features

  • Biphasic technology.
  • Universal AED algorithm for adult and paediatric patients.
  • Energy delivered: 200 Joules for adult and 50 Joules for paediatric.
  • Audible and visual prompts to guide users through complete operation sequence.
  • Configurable CPR protocol.
  • Lithium battery with more than 400 discharges of capacity.
  • Configured according to ERC/AHA guidelines 2015 and its review of 2017.
  • Automatic daily selftest ensures the device continual readiness.
  • Portable and lightweight for easy transport in any situation.
  • Rugged and durable design for any environment.
  • Optional PC software, to store and review ECG data.

acessories

  • Adult and paediatric disposable electrodes for defibrillation
  • Carrying case (1)
  • Ambulance bracket (EN1789:2007 certified) (2)
  • Non rechargeable battery (3)
  • “REANIBEX Data Manager” Software application to manage and organize all the data gathered (4)
  • Wallcase with optional alarm system. Other models available with Communication systems (GSM, GPRS, CCTV camera…)

TECHNICAL SPECIFICATIONS

GENERAL

  • Dimensions . 300mm(W) x 282mm(D) x 93mm(H) (including the handle)
  • Weight . 2.75Kg (with the battery pack) . 2.2Kg (without battery pack)

DISPLAY

  • Type . Graphic LCD with backlight
  • Dimensions . 128 x 128 pixels (70 x 70mm)
  • Speed . 25mm/second
  • Sensivity . 1 cm/mV

AED DEFIBRILLATOR

  • Waveform . Biphasic truncated exponential adjusted to the impedance of the patient
  • Output energy . 200 Joules for adult patients and 50 Joules for pediatric patients
  • Charging time . Less than 5 seconds at 200 Joules with a new fully charged battery at 25ºC
  • Electrodes types . Disposable cable-electrodes for adults and for pediatrics with identifier
  • Resuscitation guidelines . Factory set Guidelines 2018 (ERC/AHA) and its review of 2017

DATA STORAGE

  • Internal memory capacity . 30 minutes of ECG recording
  • Communications . PC connection (irDA)
  • Data review . PC application (Reanibex Data Manager) for downloading, reproducing, handling, storing and reviewing recorded episodes (optional)

BATTERY

  • Type . Non-rechargeable Lithium SO2 Battery Pack (12 VCD, 7,5 A/h)
  • Capacity . Typical: 400 dicharges of 200 Joules or 12 hours of monitoring. Minium: 300 discharges of 200 Joules
  • Shelf life . 5 years

ENVIRONMENT

  • Operating temperature . From 0 to 50ºC
  • Storage temperature . From -10 to 60ºC without the battery pack
  • Relative humidity . From 10 to 95% (non-condensing)
  • Shocks . EN 1789
  • Vibrations . EN 1789
  • Resistance to solids/water . IP44

READY FOR LIFE

O conteúdo Reanibex 200 aparece primeiro em Hoplon.

]]>