SIT AMBULANCE

ELECTRONIC
CONTROL
UNIT

SIT Ambulance is the most advanced intelligent electronic system, that operates and monitors the vehicles electronics and lighting system.
It is working with the newest automotive technologies and solid-state electronics.

CONTROL EVERYTHING FROM ONE APPLICATION

DISPLAY

SIT Amb features a:

7 ”display with 800×480 resolution

70/70/50/70 view angle

RS-232 Input Signal.

CONSOLES . INTERFACES

O conteúdo SIT.AMB aparece primeiro em Hoplon.

Power supply 10…15V DC by two independent circuits
One with permanent supply for critical devices (ex.: medical)
Circuit supplies 20 outputs:
– Outputs grouped into 4
– Each group can be activated permanently or after placing the key in the ignition.
– Outputs with 25A RMS / 50A peak

All outputs are protected by fuses and transient voltages (TVs).
One for the controlled power outputs
Circuit supplies 28:
2 combined outputs for motor direction control and capable of delivering up to 15A Rms / 30A peak with a fuse and transient voltage suppressor (TVs)

All 2 outputs have:
– 22 SSR outputs for general use with:
– Ability to obtain up to 25A Rms / 50A peak.
– Current limiting protection by fuse and SSR limit
– Transient voltage suppressor

4 outputs for PWM control protected by TVs and PTC fuse limited to 8A.

4 outputs for signal or power deviation up to 15A Rms / 30A peak
6 Interfaces for HMI devices:
2 USB 2.0
4 RS232 for auxiliary keyboards

16 digital inputs:
8 active low (GND)
4 active high (+ 12v)

4 analog inputs for level measurement (eg battery level, current consumption)
4 interfaces for temperature sensors

O conteúdo C700 aparece primeiro em Hoplon.

Power supply 10…15V DC by two independent circuits
One with permanent supply for critical devices (ex.: medical)
Circuit supplies 23 outputs:
14 outputs with 15A RMS/30A peak
2 outputs with 25A RMS/50A peak
6 outputs with 15A RMS/30A peak active only after ignition key

All outputs are protected by fuse
One for the controlled power outputs
Circuit supplies 28:
4 outputs combined by 2 with reverse polarity capacity normally used for motor direction control
All 4 outputs with capacity to source up to 15A Rms/30A peak with a fuse and transient voltage suppressor (TVs)
16 outputs for general purpose with:
Capacity to source up to 15A Rms/30A peak.
Current limiting protection by fuse
Transient voltage suppressor

4 solid state relay outputs for PWM control protected by TVs and PTC fuse limited to 8A.

4 outputs for signal bypass or power up to 15A Rms/30A peak
4 Interfaces for HMI devices:
2 USB 2.0
2 RS232 for auxiliary keypads

16 digital inputs:
8 active low (GND)
4 active high (+12v)
4 with polarity selectable

4 analogue inputs for level measuring (ex.: battery level, current consuming)
4 interfaces for temperature sensors

O conteúdo C500 aparece primeiro em Hoplon.

25x outputs 30A Max relay SPST fuse protection

3x relay SPDT

1x output transitor – fuse

9x outputs – fuse

3x inputs LOW

4x inputs HIGH

1x port I2C

2x port UART

1x GPIO

O conteúdo L300 aparece primeiro em Hoplon.

20x outputs 30A Max relay SPST fuse protection

3x relay SPDT

1x output transitor – fuse

4x outputs – fuse

3x inputs LOW

4x inputs HIGH

1x port I2C

2x port UART

1x GPIO

O conteúdo M200 aparece primeiro em Hoplon.

15x outputs 30A Max relay SPST fuse protection

3x relay SPDT

1x output transitor – fuse

3x inputs LOW

4x inputs HIGH

1x port I2C

2x port UART

1x GPIO

O conteúdo S100 aparece primeiro em Hoplon.

TECHNICAL SPECIFICATIONS

10x outputs 30A Max relay SPST fuse protection

3x relay SPDT

1x output transitor – fuse

3x inputs LOW

4x inputs HIGH

1x port I2C

2x port UART

1x GPIO

O conteúdo DIN10 aparece primeiro em Hoplon.